VAPE DEALS: Vaping | Vape Mods | E Liquid | Ecigs
Here’s another RDA for #teamcheapmod. Introducing the Vicious Ant Cyclone Clone (named K6). It comes in as just $4.82. It features an aluminium and brass construction. It also has 2 posts and a raised bottom air hole. Not necessarily the same quality build of the original. But then again. It’s over $100 cheaper than the original as well. =) Actually… it looks like a Vicious Ant Cyclone clone. But, with the airflow of the Smok Octopus. Which isn’t necessarily a bad thing. Considering all of the positive reviews that the Octopus received. And at just $4.82… how can you possibly go wrong with this one?
Didn’t know the cyclone top cap was threaded on, i prefer this one for the better air hole and unthreaded top cap
http://www.fasttech.com/products/1411/10004595/1353408-yk1-kts-stainless-steel-electronic-cigarette-atomi
Hm… didn’t think about that. You might be right.
This is a Smok Scar clone, just like their Octopus clone.. I think it’s called X1 or K1… the old one has the same screw on top cap… It’s horrible.. the airflow just sucks.. the local shop that has them drills them out for customers..
The Fasttech X1 can be great if you drill two 1/8th inch holes through the aluminum cap. And plug the 510 airpath with a piece of toothpick. 5 bucks and 5 minutes, then I had a cloud chaser that could compete with my trident. I personally like the threaded cap, when I yank the DT off, I know its the only thing coming off.
The smoke scar is only rda with 3 terminals in this line up as all the other ones have only two
http://101vape.com/rebuildable-atomizers-tanks/46-smoktech-scar-rda-dual-coil.html
Could this be used on a bottom-feeder? I want an RBA for my Reo Mini but I don’t want to splash out on a Cyclone.
No, unfortunately this doesn’t bottom feed. Drip only.